dual-in-line sockets carrier type solder tail www.mill-max.com 516-922-6000 32 series 612 sleeve (pin) contact (clip) quantity per tube a b c total number of pins specify plating code xx= 13 93 10 ? au 200 ? sn/pb 30 ? au 30 ?au application of dip/sip socket carriers socket carriers provide a convenient way of loading groups of receptacles onto a printed circuit board. a dip carrier insulator with durable pins is assembled with loose receptacles. the socket carrier keeps the receptacles fixtured in the pcb during soldering. after soldering, the carrier insulator is removed, leaving behind a low profile socket pattern. in high volume, the carrier can be reloaded with fresh receptacles. ordering information 10 0.5 0.2 0.3 40 612-xx-210-41-001 4 0.2 0.3 0.4 102 612-xx-304-41-001 6 0.3 0.3 0.4 67 612-xx-306-41-001 8 0.4 0.3 0.4 50 612-xx-308-41-001 10 0.5 0.3 0.4 40 612-xx-310-41-001 14 0.7 0.3 0.4 28 612-xx-314-4 1-001 16 0.8 0.3 0.4 25 612-xx-316-41-001 18 0.9 0.3 0.4 22 612-xx-318-41-001 20 1.0 0.3 0.4 20 612-xx-320-41-001 22 1.1 0.3 0.4 18 612-xx-322-4 1-001 24 1.2 0.3 0.4 16 612-xx-324-41-001 28 1.4 0.3 0.4 14 612-xx-328-4 1-001 20 1.0 0.4 0.5 20 612-xx-420-41-001 22 1.1 0.4 0.5 18 612-xx-422-41-001 24 1.2 0.4 0.5 16 612-xx-424-41-001 28 1.4 0.4 0.5 14 612-xx-428-41-001 32 1.6 0.4 0.5 12 612-xx-432-41-001 24 1.2 0.6 0.7 16 612-xx-624-41-001 28 1.4 0.6 0.7 14 612-xx-628-41-001 32 1.6 0.6 0.7 12 612-xx-632-41-001 36 1.8 0.6 0.7 11 612-xx-636-41-001 40 2.0 0.6 0.7 10 612-xx-640-41-001 42 2.1 0.6 0.7 9 612-xx-642-41-001 48 2.4 0.6 0.7 8 612-xx-648-41-001 50 2.5 0.6 0.7 8 612-xx-650-41-001 52 2.6 0.6 0.7 7 612-xx-652-41-001 50 2.5 0.9 1.0 8 612-xx-950-41-001 52 2.6 0.9 1.0 7 612-xx-952-41-001 64 3.2 0.9 1.0 6 612-xx-964-41-001 ? convenient way to load loose receptacles on pc board. see below for application details. ? offers maximum ventilation and better visibility for inspection. ? hi-rel, 4-finger #30 clip rated at 3 amps. see page 208 for details. ? uses mill-max #0255 pin receptacle. see page 134 for details.
|